The IO-Warrior100 module is an easy start for using the IO-Warrior100 and a good option for applications with small volumes where no surface mount parts can be used.
All I/O pins and power supply are available on two double rows of pads in 100 mil pitch at the sides of the module. The pin assignment can be found in the data sheet.
The module is "Ready-To-Use" and connects to the computer via a mini-USB receptacle. Due to the device classification as HID (Human Interface Device) no device specific drivers are required for operation.
Our SDK (Software Development Kit) for Windows, Linux and OSX (limited support) has examples for all functions.
Technical data:
- 82 universal I/O lines, typ.1000 Hz write and read speed
- I2C master with 10, 50, 100, 400 or 1000 kHz
- A/D-wander, 4 channels, 12 bit, internal reference for ±20 mV accuracy
- D/A-wander, 2 channels, 12 bit
- 4 x 16 bit PWM
- Control of various display modules with HD44780 compatible protocol
- Support for 8 x 64 LED matrix (up to 512 LEDs)
- Control of up to 500 digital LEDs (e.g. NeoPixel, WS2812 and others)
- Control of an 8x8 or 16x8 switch or button matrix
- Identifies either as low power (100 mA) or high power (500 mA) bus powered device, selectable by jumper
- Dimensions: 63x54mm
